Stainless Mid Control, Chopper, Evo, Shovelhead for 1.5"/2" Belt

FOR 1.5/2" belt size, see my other listing for a 3" belt setup

These mount the same way as the motor plates we offer, between the engine and trans on shovels and evo's running 4 speed transmissions, the peg position is slightly higher than stock but not extreme like the rear engine mounted mids

These can be used as a foot shifter or a foot clutch with the inner shift lever offering several linkage bolt hole locations to fine tune your setup, higher up for shift, lower down for clutch.

stainless/aluminium construction for corrosion resistance without the need for painting/plating.

Designed to match an oem shovelhead R/H foot control (see image of R/H side)

1.5"/2" belt and 3" belt options available.

Includes backing plate, inner shift lever and footpeg/mount, you will need an oem Shovelhead shift lever P/N 34564-74TA (if you are converting a mid control Shovelhead from closed to open primary, you will already have this.

Motorcycles are inherently dangerous, and modifying them can increase the risk of mechanical failure, serious injury, or death. All products sold by VTwinSupply are intended for show purposes only. These products are not designed, tested, or certified to comply with any road going standards and may not be legal for street use in your location.

By purchasing, installing, or using these products, the customer knowingly agree that:

• You are responsible for determining whether a product is legal to install and use on your motorcycle.
• Any modification to your motorcycle may affect its road legality, MOT compliance, insurance cover, manufacturer warranty, or safe operation.
• All products are fitted and used entirely at your own risk.